Electrical Energy and Power MCQs Class 12 | 50 Questions

Class 12 Physics Part 1, Chapter 3 MCQs: Electrical Energy and Power

Current Electricity · 50 MCQs · Name-based score card

Class12SubjectPhysicsPart1Chapter3Topic4 of 6MCQs50

About this topic

This topic looks at how electrical energy is converted and how fast it is used. Work done on a charge moving through a potential difference gives the energy supplied, and power is the rate at which that energy is delivered. This first block covers the basic energy formula.

W = qV  |  q = It  |  W = VIt

How the 50 MCQs work

  1. Enter your name once. It appears on your score card.
  2. Answer the MCQs. You see the answer and a short explanation straight away.
  3. Work through the five blocks of 10. Use the jump links to move around.
  4. Press Show my score card at the bottom to see your result with a level-wise breakdown.

Practise MCQs 1 to 50

Enter your name to begin

If Start MCQs does nothing, tap it once more or refresh the page.

Common mistakes in this topic

  • Mixing up watts and kilowatt-hours. Watt is a unit of power; kilowatt-hour is a unit of energy.
  • Forgetting to convert minutes to hours before calculating energy in kWh.
  • Using the wrong form of the power formula. P = I²R is useful when I is known, and P = V²/R when V is known, but using the wrong one with the wrong fixed quantity gives the wrong answer in series or parallel circuits.
  • Assuming higher wattage always means higher resistance. R = V²/P, so at the same voltage, a higher wattage device actually has lower resistance.

Quick FAQ

Why does the higher-resistance bulb glow brighter in series but dimmer in parallel? In series the same current flows through both, and P = I²R, so higher resistance means more power. In parallel the same voltage acts across both, and P = V²/R, so higher resistance means less power.

What is a ‘unit’ on an electricity bill? It is one kilowatt-hour, the energy used by a 1000 W appliance running for one hour.

Why does a bulb glow dimmer when run below its rated voltage? Power depends on the square of the voltage (P = V²/R), so even a moderate drop in voltage causes a much larger drop in the power, and hence the brightness.

What comes next

The next topic, Cells, EMF, Internal Resistance and Combination of Cells, looks at how a real battery delivers energy to a circuit and what limits the current it can supply.

Anmol’s Study Hub is an independent, unofficial study site, not affiliated with CBSE or NCERT. All questions are original practice material. Found a mistake? Tell us on the Contact page.

Leave a Comment