Cells, EMF and Internal Resistance MCQs Class 12 | 50 Questions

Class 12 Physics Part 1, Chapter 3 MCQs: Cells, EMF, Internal Resistance and Combination of Cells

Current Electricity · 50 MCQs · Name-based score card

Class12SubjectPhysicsPart1Chapter3Topic5 of 6MCQs50

About this topic

This topic is about the energy source in a circuit: the cell. EMF is the energy a cell gives per unit charge, and internal resistance is the resistance inside the cell itself that reduces the voltage actually delivered. This first block covers the basic EMF and internal resistance relation.

ε = V + Ir  |  V = ε − Ir  |  r = (ε − V)/I

How the 50 MCQs work

  1. Enter your name once. It appears on your score card.
  2. Answer the MCQs. You see the answer and a short explanation straight away.
  3. Work through the five blocks of 10. Use the jump links to move around.
  4. Press Show my score card at the bottom to see your result with a level-wise breakdown.

Practise MCQs 1 to 50

Enter your name to begin

If Start MCQs does nothing, tap it once more or refresh the page.

Common mistakes in this topic

  • Confusing EMF with terminal voltage. EMF is the cell’s full energy per charge, but the terminal voltage is always a bit less once current flows, due to the internal resistance.
  • Adding internal resistances in parallel the way currents are added, instead of combining them like parallel resistors.
  • Thinking cells in parallel increase the EMF. For identical cells, parallel connection keeps the EMF the same as one cell, and only lowers the internal resistance.
  • Forgetting the internal resistance when calculating current, especially in short-circuit or low-external-resistance problems.

Quick FAQ

What is the difference between EMF and terminal voltage? EMF is the total energy per unit charge a cell can supply, including what is used inside the cell. Terminal voltage is what is left over for the external circuit, after the internal resistance has taken its share.

Why connect cells in parallel instead of series? Parallel connection does not raise the EMF, but it lowers the effective internal resistance, so the combination can supply a larger current without its terminal voltage dropping too much.

When is the power delivered to the external circuit greatest? When the external resistance equals the internal resistance of the source. This is the condition for maximum power transfer.

What comes next

The next topic, Kirchhoff’s Rules, Wheatstone Bridge and Metre Bridge, builds on this to analyse more complex circuits that cannot be solved by simple series-parallel reduction alone.

Anmol’s Study Hub is an independent, unofficial study site, not affiliated with CBSE or NCERT. All questions are original practice material. Found a mistake? Tell us on the Contact page.

Leave a Comment